Configuration Commands
The HopNet radio has a wide selection of configuration parameters that can
be modified using one or more of the configuration commands. The
commands can be grouped into five categories based on what they do. The
five sections are:
•
Serial Interface Commands
•
Network Commands
•
Protocol Commands
•
Status Commands
•
Memory Commands
Each command is described in detail below. In the descriptions, brackets ([,])
are used to denote a set of optional arguments. Vertical slashes (|) separate
selections. For example, given the string
wn[?|0..3f]
, some legal commands
are
wn?
,
wn0
,
wn3
and
wna
. Most commands which set a parameter also
have a
?
option which causes the modem to respond with the current
parameter setting, e.g.,
wn?
When using the WinCom window to enter these
commands, the syntax must be followed as described. Each modem
command must be followed by either a carriage return or a line feed. When
these commands are entered from the main or advanced Wizard screen, the
Wizard will insure the proper syntax is used.
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012
HN-210D/X, HN-214D/X Rev. 2.0 01/13/17
41 of 64
www.murata.com
