Click on the Continue button to bring up the next screen.
The program will read and display the current settings of the HopNet radio. The HopNet
radio is shipped from the factory as a remote. The Remote button on the Wizard screen
will appear depressed indicating the HopNet radio is a remote.
NOTE: The S/N displayed in the bottom left corner is the serial number of the radio
inside the unit and is different from the serial number of the HopNet unit. Both the
HopNet unit serial number and the radio serial number are on the radio unit of the
HopNet product.
To set the HopNet radio as a base, click on the Base button. The Base button will
depress and the Remote button will pop up. The screen heading will change from
“Remote Parameters” to “Base Parameters.”
Copyright © Murata Manufacturing Co., Ltd. All Rights Reserved. 2012
HN-210D/X, HN-214D/X Rev. 2.0 01/13/17
12 of 64
www.murata.com
