© Munters Corporation, August 2019
12
QM1077r13
Installation Instructions
Chapter 2
Step 9
Attach Drip Shield to bottom of framed opening using (3) Barn Screws (Not Provided).
See Figure 9A and 9B
.
If a 4” wall is used a support board must be installed as shown in
Figure 9B.
Be sure not to deform Drip Shield
when installing screws.
Figure 9A
Figure 9B
Drip Shield
Barn Screw
(not provided)
4” Wall
6” Wall
Drip plate
Drip plate
Support board
Barn Screw
Barn Screw
Step 10
Locate Drain Hole in Orifice Panel. This is the bottom of the Panel. Set bottom edge of panel on Drip Shield
ledge and center panel on opening. Secure Panel to wall using (16) Barn Screws (Not Provided).
See Figure10A and 10B.
Figure 10A
Figure 10B
Drain Hole
Drip Shield ledge
2UL¿FH3DQHO
Barn Screws
(Not Provided)
