© Munters AB, 2013
27
8.5 Replacement of V-belt
If the V-belt should be damaged in any way, it has to
be replaced. How to replace the V-belt:
1. open the safety mesh guards and loosen the
bolts of the motor frame; slide the motor frame
towards the centre of the fan to release any
tension on the V-belt;
2. undo the 25mm hexagonal nut holding the
propeller assembly to fan body;
3. carefully remove the propeller assembly from the
fan body and let it rest on the bottom of the fan
body;
4. remove the old V-belt;
5. insert the new V-belt.
6. replace the propeller assembly into the fan body;
7. fasten the 25mm hexagonal nut onto the shaft of
the propeller assembly;
8. tighten the V-belt by pushing the motor away
from the centre of the fan and then tighten the
bolts on the motor frame.
fig.23
Maintenance
Chapter8
1
3
5
7
8
4
6
2
