© Munters AB, 2013
21
After installation, follow the steps mentioned below to verify that the fan is working properly:
•
check if all the fans are secured tightly to the suspension chains or mounting system;
•
ensure that all the necessary safety equipment is fitted to the fans;
•
ensure that all electrical connections are done properly and comply with local regulations;
•
note in which direction the propellers are supposed to turn, by observing the direction of the arrow on the
central pulley;
•
remove all obstacles from the front and back sides of the fans;
•
ensure that all people and animals are standing clear of the fans;
•
turn the electrical power to the fans on;
•
observe the direction in which the propeller of each of the fans are turning to ensure that it is in the same
direction as that of the arrow on the central pulley;
•
turn the electrical power to the fans off.
Commissioning
6.
Do not attempt to correct any problem observed during the above mentioned
steps while the fan is in operation. Wait until the electrical power has been
switched off and the fan has come to a complete stand still. Lock the electrical
switch in the off position with a pad lock while working on the fan.
Warning
