© Munters AB, 2013
14
•
supply from an electrical network with characteristics different from that specified in the wiring diagram;
•
total or partial failure to observe instructions;
•
insufficient maintenance;
•
use of non-original spare parts;
•
use of lubricants with characteristics different from those specified in the technical documentation attached
to the manual;
•
use by minors;
•
use under the influence of drugs, alcohol, etc.
Use of non-original spare parts
Original spare parts ensure the reliability and safety of the operation of the fan: in the event of maintenance/
replacement, consult the spare parts list, the list of parts and components used and the relevant technical
documentation attached to this manual.
Insufficient maintenance
A correct normal maintenance is one that maintains the original integrity or restores the fan’s efficiency, while at
the same time limiting normal deterioration resulting from use.
Special maintenance work can also prolong the usable life of the machine and/or, secondarily, can improve its
efficiency, reliability, productivity and ease of maintenance and inspection.
Unauthorized modifications or tampering
No operation is permitted which is aimed at making modifications to the fan and the safety devices fitted to it;
similarly, it is not possible to alter its operational and performance characteristics.
Use of the fan other than as described in the user manual or outside the
operational limits laid down by the manufacturer is considered IMPROPER USE.
In the event of IMPROPER USE the manufacturer declines all liability in relation
to any damage that may be caused to persons or property, and any kind of
warranty will be considered invalidated.
WArNINg
In the event of replacement of safety devices, it is essential to maintain the safety
and operational characteristics of the original device, preferring replacement
with an identical component.
WArNINg
Interference with the command and control circuits is prohibited: such operations
could cause damage to the equipment and serious danger to the operator.
WArNINg
Operating conditions
Chapter4
