ComDry M160L
4.9 Expanding the system
CA
CA
CAUTION!
UTION!
UTION!
Never connect ComDry directly to a standard Ethernet network, even if the connector type is the same (RJ45-8,
modular connector). Doing so might damage both the ComDry control system and/or the computer network.
All ComDry dehumidifiers are equipped with two CAN BUS ports, located behind a cover next to the
appliance inlet. An indoor remote control, external humidity/temperature sensors or an external signal box
can be connected to these CAN BUS ports. It does not matter which of the above devices will be connected
to which port. When no port is used the two empty termination plugs must be fitted to the ports.
Figure 4.6 Remove the cover
Figure 4.7 , 2 CAN BUS ports with empty plugs fitted
11
Installation
190TEN-1098-D1404
Summary of Contents for comdry m170l
Page 46: ......
Page 48: ...www munters com ...
