Munters comdry m170l, User Manual

Page: 27 / 48

ComDry M160L
7 Menus and parameters
To set the system parameters, see 6.9, Change the system settings and 6.11, Reset the counters . For limits when
setting parameters, see 7.7, Min, max and default values .
7.1 Humidity
The dehumidifier is always operating in automatic mode. It will dehumidify until the desired humidity level
(Set Value minus Hysteresis value) is reached. Then the green operating indicator will start to flash in a long
on and short off sequence, indicating that the dehumidifier is in stand-by. It will start to dehumidify again
when the humidity is equal to, or greater than the Set Value.
Type of humidity control (relative humidity, dew point or absolute humidity) and unit system (metric or
imperial) governs the readings and settings in this menu. See
7.5, Functions for reference and explanation.
This table shows the display views and possible settings of the Humidity menu:
Display view Description Type Setting option
C
f
X
kWh
f
X
* RH1 49%
Internal sensor reading READ ONLY D1.../ X1...
C
f
X
kWh
f
X
R H2 35%
(External sensor reading)
1
READ ONLY D2.../ X2...
C
f
X
kWh
f
X
R H3 35%
(External sensor reading)
1
READ ONLY D3.../ X3...
C
f
X
kWh
f
X
S V RH 5
Set Value Humidity ADJUSTABLE HIGHER/LOWER
190TEN-1098-D1404
Menus and parameters
24