18
11.2 Inspecting and Handling the unit
At delivery, the package should be checked and any damage should be reported immediately to the carrier
claims agent.
When handling the unit, take into account the following:
1.
Fragile, handle the unit with care.
2. Choose on before hand the path along which the unit is to be brought in.
3. Move this unit as originally package as possible.
4. When lifting the unit, always use protectors to prevent belt damage and pay attention to the position of
the unit’s centre of gravity.
11.3 Indoor Unit Installation
11.3.1 Installation place
Installation in the following places may cause trouble. If it is unavoidable, please consult with the local
dealer.
•
A place full of machine oil.
•
A saline place such as coast.
•
A place full of sulfide gas such as hot-spring resort.
•
Places where there are high frequency machines such as wireless equipment, welding
•
Machine and medical facility.
•
A place there is no combustive gases and volatile matter.
•
A place of special environmental conditions.
Installation in the following places:
•
A place where is no obstacle near the inlet and outlet area.
•
A place which can bearf the indoor unit.
•
A place which is convenient to maintenance.
•
A place which provides the space around the indoor unit as required right in the diagram.
•
There is strong electromagnetic wave existing.
•
A place which is far from heat, steam and inflammable gas.
11.3.2 Drilling A Hole and Mounting Installation Board
Installation Board and Its Direction (unit: mm)
MUP-09/12-W9 Type:
DC Fan Coil Unit Two‐pipe Wall‐mounted Series
