20
II.Control panel operation description
1) ON/OFF
Operation mode one:
Power off: Long press “ ” for 3s in the main
interface. The panel displays “OFF” and other icons
will be extinguished. The unit stops.
Power on: When the display panel shows “OFF”, long
press “ ” for 3s and wait for the unit to enter
standby mode. Then power on the unit according to
Operation mode two.
Operation mode 2:
Power off: Press “ ” in the main interface to enter
mode choice function and the icon which indicate the
current mode will flicker. Press “ ” circularly to
choose power off mode, “ ” will flicker at this
moment. Press “ ” button to confirm the power off
mode. By this time, “ ” will be constantly light and
the unit stops.
Power on: In the power off mode, press “ ” to
enter mode choice functionn. Press “ ” circularly
to choose one kind of “power on” mode, the mode
“ ” to enter timing on setting.
ś
At this moment, last 2 digits of the nixie tube display
“01” which means the first group setting begins. Press
“ ” to the next step.
Ŝ
By this time, mode icon will flicker and press “ ”
to choose timing on mode. Press “ ” to confirm
your choice and go to the next step.
ŝ
By this time, the last 2 digits of the nixie tube will
flicker and press “ ” or “ ” to adjust temperature
and set the temperature of the inlet water. Press
“ ” to confirm and move to the next step.
Ş
By this time, the first 2 digits of the nixie tube will
flicker and press “ ” or “ ” to adjust time of timing
on. Press “ ” to confirm and switch to minute
setting automatically. The last 2 digits of the nixie tube
will flicker and press “ ” or “ ” to adjust minute
setting of timing on.(minimal unit of minute adjustment:
15 minutes) .
ş
Press “ ” to confirm. The first group setting is
finished and “ ” will be constantly light.
When processing the second timing setting, repeat the
1-2 operation above. When the nixie tube displays “01”
and flicker, press“ ” or “ ” to choose the timing
on group. When the nixie tube displays “ 02 ” which
means setting timing on function of the second group.
Refers the timing on setting operation of group 1 to set
that of group 2.
● Long press “ ” for 3s to return to the previous
interface to reset the parameter during setting clock
timing.
icon will flicker at the moment. Press “ ” to
confirm the power on mode. The unit will run as the
chosen mode when the mode icon will be constantly
light.
NO.
Icon
Description
Up
1.(Value increase)
2.Forward to the previous interface.
Down
1.(Value decrease)
2.Backward to the next interface.
23
24
3) Clock setting
Long press “ ” for 3s to enter function interface.
“ ” clock icon will flicker. Press “ ” to enter
clock setting function. “ ” icon will be constantly
light and the first 2 digits on nixie tube will flicker. Press
“ ” or “ ” to set minute. Press “ ” when
finish setting and “ ” will be extinguished.
4) Timing setting
1. Timing on setting
Ś
Long press “ ” for 3s to enter function interface.
“ ” clock icon will flicker. Press “ ” again to
enter timing on function. “ ” will flicker and press
1-2 operation above. When the nixie tube displays “01”
and flicker, press “ ” or “ ” to choose the timing
off group. When the nixie tube displays “02”which
means setting timing off function of the second group.
2.Timing off setting
Ś
Long press “ ” for 3s in the main interface to enter
function interface. Press “ ” circularly to enter
timing off function. “ ” will flicker and press “ ”
to enter timing off setting.
ś
At this moment, the last 2 digits of the nixie tube
display “01” which means the first group setting begins.
Press “ ” to the next step.
Ŝ
By this time, the first 2 digits of the nixie tube will flicker
and press “ ” or “ ” to adjust time of timing off.
Press “ ” to confirm and switch to minute setting
automatically. The last 2 digits of the nixie tube will
flicker and press “ ” or “ ” to adjust minute setting
of timing off. Press “ ” to confirm. The first group
setting is finished and “ ” will be constantly light.
ŝ
When processing timing setting of group 2, repeat the
2) Mode choice and temperature settings
Press “ ” in the main interface to enter mode
choice function. The “Mode” icon will flicker. Click
“ ” circularly to choose a mode. The circulating
order is “Cooling mode”→“Heating mode”→“Water
pump mode” →“Power off mode” → “Cooling mode”.
The chosen mode will flicker. Press “ ”or “ ”
to increase/decrease the temperature in the chosen
mode.
Press “ ” to confirm power off mode and the
set temperature. Mode icon will be constantly light
and the unit will run as the chosen mode.
Press “ ” or “ ” in the main interface to
increase/decrease the temperature in the chosen
mode.
