SNOW & ICE DIVISION
PAGE 8
CALIBRATION SCREENS
ACCESSING CONFIGURATION MENU:
This menu is passcode protected to limit access
to non-authorized personnel. It is recommended
to change the passcode from the default value
to limit access and prevent unintentional system
adjustments.
Follow the steps below to enter the configuration menu:
1. Accessing Config Menu: With the spreader
off, simultaneously depress the Auger and
Spinner knobs.
2. Passcode Entry: The liquid knob will adjust the
left 2 digits and the spinner control will adjust the
right 2 digits.
(Default Passcode = 0001)
3. Navigating Configuration Menu:
• Rotate the auger knob to scroll through the
various adjustment items.
• To enter and exit the sub menus, depress the
auger knob.
• To change settings, rotate the liquid and
spinner knobs.