Munchkin Extending XL, Owner'S Manual

Page: 8 / 29

How To Install How To Install
14 15
STEP 6: INSTALL UPPER CATCH (WALL BRACKET)
1. Place the upper catch bracket against the wall. If necessary, loosen the nut and extend
the adjustment rod on the upper catch side until it is seated in the bracket. Then, mark
the screw holes with a pencil to create an indentation.
2. Determine whether there is a stud behind the drywall where you will install the upper
catch wall bracket. Proceed to either
3a or 3b .
3a. For Drywall Without Stud / Plasterboard:
Drill a 7/32”(5.5mm) hole into the drywall at each
pencil center mark. Insert a drywall anchor into each
hole. Then, use a screwdriver or drill to insert the
screws through the upper catch wall bracket into the
drywall anchor.
3b. For Drywall with Stud:
Drill a 5/64”(2mm) pilot hole into the stud at each
pencil mark (no anchor needed). Then, use a
screwdriver or drill to insert the screws through the
upper catch wall bracket into the stud.
3a. Drywall
3a. Plasterboard
3b. Stud
7/32"
5.5mm
Drywall
anchor
Large
screw
Large
screw
7/32"
5.5mm
5/64"
2.0mm