Munchkin Extending XL, Owner'S Manual

Page: 6 / 29

How To Install How To Install
10 11
5a. For Drywall Without Stud / Plasterboard:
Drill a 7/32"(5.5mm) hole into the drywall at each
pencil mark. Insert a drywall anchor into each hole.
Then, use a screwdriver or drill to insert the screws
through the upper and lower hinge wall bracket into
the drywall anchors.
5b. For Drywall with Stud:
Drill a 5/64"(2mm) pilot hole into the stud at each
pencil mark (no anchor needed). Then, use a
screwdriver or drill to insert the screws through the
upper and lower hinge wall bracket into the stud.
Medium
screw
Medium
screw
Medium
screw
Medium
screw
Drywall
anchor
Drywall
anchor
7/32"
5.5mm
1 Way Lower Catch
Wall Bracket
Open edge
7/32"
5.5mm
5/64"
2.0mm
5a. Drywall
5a. Plasterboard
5b. Stud
STEP 4: INSTALL LOWER CATCH (WALL BRACKET)
1. Place template “I” against
the wall with tape, flush to
the floor. Mark the screw
holes with a pencil to create
indentation, then remove
the template.
2. Identify which lower catch
wall bracket to use:
For Top and bottom of stairs:
Choose the 1 way lower
catch wall bracket. The
opening on the edge of the
bracket should always be
facing towards you (away
from the stairs), so the gate
only swings away from
the stairs.
For Hallway and Doorways:
Choose the 2 way lower
catch wall bracket so that
the gate swings in either
direction.
Temp. I
(Catch Side)
2 Way Lower Catch
Wall Bracket