How to Use
How to Use
10
11
6
.
When the liquid reaches approximately 37°C,
the warming unit will beep to indicate the
cycle is complete. The liquid will be kept at this
temperature for up to
15 minutes
after the cycle
is complete. After the
15 minutes
the warming
unit will auto shut off.
NOTE:
To ensure your liquid is warmed properly,
wait until the end of the warming cycle before
removing the bottle.
7
.
When ready to remove the bottle, press and
hold the power button for
two seconds
to turn
off the unit. Then unplug the cord from the
unit and the wall outlet. Flip the device upside
down, unscrew the baby bottle and shake the
bottle well to ensure proper heat distribution.
Always check the liquid’s temperature before
feeding.
NOTE:
Warming a second bottle –
Allow at least 5 minutes for the unit to cool
before next use.
ON/OFF: Press and hold for
2 seconds
HOW TO CLEAN
Always unplug unit and ensure that it is cool before cleaning. Do not use scouring pads,
abrasives or solvents for cleaning; they may damage the appliance and its surface. Place
the rubber plug back into the plug attachment to prevent water intrusion and cause
electrical short during cleaning.
Digital Bottle Warmer:
Wipe all surfaces with a damp cloth or sponge using mild liquid
soap, rinse with clear water. Allow to air-dry. Do not submerge unit in liquid.
Adapters and Gaskets:
Wash with mild liquid soap
and rinse with clear water. Allow to air-dry. Always
replace gaskets to their proper locations (gasket
identification letter facing up).
Keep Dust Cover on when not in use to keep
heating plate clean.
