Specifi cations subject to change without notice.
Chart dimensions rounded up to the nearest
1
/
8
"
(millimeters rounded up to next whole number)
.
ROUGH-IN DATA
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)240-2400 • Fax (636)272-2408 • (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #:
Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
AVAILABLE AT:
T
RUE
R
EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
.S.A.
TM
U.S.A.
TR1H-1S
TR1H-1S
8/07
Provides cabinet holding
temperature of 80°F to 180°F
(26.6°C to 82.2°C).
Equipped with low-velocity fans
to assure even temperature
distribution throughout the
cabinet. Fans are controlled by
exterior on/off switch.
Two (2) stainless steel (for
corrosion resistance), fi nned
tube heating elements (1000
watts each) for uniform
generation of electric heat.
Cabinet comes with a total of
2000 watts.
300 series stainless steel exterior
and interior. The very fi nest
stainless with higher tensile
strength for fewer dents and
scratches.
Cabinet comes equipped with
one (1) interior kit option per
full section standard, factory
installed. Four (4) different
interior kits available.
Positive seal self-closing door
with 120° stay open feature.
Lifetime guaranteed door hinges
and recessed door handle.
Entire cabinet structure and
solid door are foamed-in-place
using high density, CFC free,
polyurethane insulation.
R
TR Specifi cation Series:
Reach-In Solid Door Heated Cabinet
®
Model
Doors
Capacity
(Cu. Ft.)
(liters)
Cabinet Dimensions
(inches)
(mm)
L
D
†
H
*
Watts
Voltage
NEMA
Confi g.
Cord Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TR1H-1S
1
31
878
29
737
34
5
/
8
880
78
1
/
4
1988
2000
115/208-240/1
14-20P
9
2.74
350
159
†
Depth does not include 1
1
/
8
"
(29 mm)
for system mechanical components.
*
Height does not include 6
1
/
8
"
(156 mm)
for legs, 5
"
(127 mm)
for optional castors and 1
"
(26 mm)
for system mechanical components.
Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
