30
GOGO Bracket
16.2
The Gogo network utilizes an antenna with side fins that do not work well with the flexible strap. We have design a specific
Gogo Bracket for that antenna, which is to be used instead of the Bracket. The Gogo Bracket can be stored in the accessory
bay in the case.
To attach the Gogo Bracket:
1.
First attach the GOGO Bracket tether to the structure.
2.
Place the GOGO Bracket over the top the antenna and open the screw knob so that the clamp fits over the vertical fin.
3.
Once the GOGO Bracket is seated squarely on the antenna, start fastening the screw until the bracket is firmly attached to
the antenna.
4.
The Tool can then be mounted to the top of the mounting plate. Attach the Tool tether. Note that you can only mount the
Tool in the forward position. The Tool is now used in the exact same way to perform an alignment and verification.
Tether
Screw
Gogo
Bracket
1
2
4
3
Summary of Contents for Smart Aligner
Page 1: ...USERS GUIDE V1 1 January 2015...
Page 20: ...Report example 13 5 20...
