Multitone CS100, User Manual

Page: 8 / 60

Page 7
System
Overview
1.1 CS100 System Specifications
Range – up to 300m
Handsets can be registered via a
Master handset – or using a PC
Supports up to 8 handsets
6 handsets can make or receive
calls simultaneously
Measurements – 150 x 150mm
Connects to the Host PABX by a
twisted pair standard telephone cable
Base unit can be placed up to 7000
metres from the switchboard
depending on PABX limits
LED lights to indicate operations
status
The CS100 is a single cell DECT System that allows up to 8 wireless handsets to be
connected, covering an area of up to 300 metres from where it is placed. It is an
adjunct to a PABX for 8 A/B connections and a RS232 computer programming
interface.
Up to 6 repeaters can be used with a maximum of 3 of the repeaters ‘daisy chained’
to extend the coverage area. As you move outside the range of the base unit,
coverage will be handed over to the repeater so that the call doesn’t get dropped.
A computer is NOT required to run the CS100 system, although system
administration software is supplied and recommended. Handsets can be logged in
to the system using the ‘Master’ handset, which is configured during installation.
Analogue A/B Line Features
The inter working unit creates the interface between 8 analogue lines and the digital
lines in the DECT system. The A/B lines are all galvanically isolated from the rest of
the CS100 DECT System and from each other.
Features for all 8 lines:
DTMF transmit and Single tone receive
DTMF receive and Single tone transmit (Option)
Echo cancelling
Echo suppression
Pulse generating
Ringing detection
Loop break
Galvanic isolation