Multitone CS100, User Manual

Page: 26 / 60

Page 25
Master
Handset
3.4 Registering additional handsets via Master
handset
Once the Master handset is configured, it can be used to register additional
handsets to the CS100 System unit. If you want to register an additional handset,
the Master handset must “allow” you to do so.
Follow these steps to register additional handsets:
1. Press the Menu key on the Master handset.
2. Press the Right Arrow key.
3. The display will read ‘ EXT. Service ’. Press OK.
4. The display will read ‘ Clip Stack ’. Press the Left Arrow key twice so that
‘ Read/Write userdata ’ appears on the display.
5. Press OK , and the serial number of the Master will appear on the display.
6. Using the Right Arrow key, scroll through the list of available positions
(channel 01 – 07). If a position is empty, the display will show
“______________”.
7. Enter the serial number of the handset you wish to add. (The serial number
may be found on a label inside the handset beneath the battery. It will begin
“00077-xxxx”. When entered, press
OK .
8. The handset will now ask for an extension number. Simply enter the desired
number and press OK (the extension number should be the same as the
PBX extension number for the port on the CS100 you have assigned the
handset to).
9. Press the Left Arrow key to return to the registration menu, and repeat these
steps to add more handsets.
The Master handset has now “allowed” the system to register the new handset.
The additional handset must be registered using the same process described in
section 3.2