Multitech MultiVOIP MVPGK1 Gatekeepers, Hardware User'S Manual

Page: 65 / 87

66
MultiVOIP Gatekeeper User Guide
Entering Setup
To enter the BIOS Setup screen, power on the computer and then press the Delete key immediately.
The other way to enter Setup is to power on the computer and then, when the below message appears
briefly at the bottom of the screen during the POST (Power On Self Test), press the Delete key or
simultaneously press <Ctrl>, < Alt >, and < Esc > keys (Control, Alternate, & Escape).
TO ENTER SETUP BEFORE BOOT PRESS <CTRL-ALT-ESC> OR <DEL> KEY
As long as the above message is present on the screen you may press the <Del> key (the one that
shares the decimal point at bottom of the number keypad) to access the Setup program. After a
moment, the main menu of the Award SETUP program will appear on the screen:
ROM / PCI / ISA BIOS (2A59FP6C)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMT SETUP
PNP/PCI CONFIGURATION
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
INTERGRATED PERIPHERALS
PASSWORD SETTING
IDE HDD AUTO DETECTION
HDD LOW LEVEL FORMAT
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc: Quit
F10: Save & Exit Setup
(Shift) F2: Change Color
:SELECT ITEM
Time, Date, Hard Disk Type .........
Figure C-3. Setup Program Initial Screen
Setup Keyboard Commands
A common set of keyboard commands is used for all BIOS-related screens. For example, you may use
the cursor up/down keys to highlight the individual menu items. As you highlight each item, a brief
description of that item’s function will appear in the lower window. If you have a color monitor you can
use the Shift F2 keys to scroll through the various color combinations available.
In general, you use the arrow keys to highlight items and then press Enter to select. Use the PageUp
and PageDown keys to change entries. Press F1 for help. Press Esc to quit. The following table provides
more detail about how to navigate in the Setup program using the keyboard.
Up arrow Move to previous item
Down arrow Move to next item
Left arrow Move to the item in the left hand
Right arrow Move to the item in the right hand
Esc key Main Menu — Quit but do not save changes into CMOS
Submenu
Exit current page and return to Main Menu
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ key Increase the numeric value or make changes
- key Decrease the numeric value or make changes
F1 key General help