manualshive.com logo in svg

Multitech MULTIVOIP MVP-3010, User Manual

The Multitech MULTIVOIP MVP-3010 is a versatile and advanced communication device that empowers businesses with seamless connectivity. Unlock the full potential of this product by accessing its detailed User Manual, available for free download at manualshive.com. With step-by-step instructions and comprehensive guidelines, make the most of your device effortlessly.

Share
Download
background image

MultiVOIP User Guide 

Index 

367

 

 

Enable (Call Forwarding) ......... 186 
Forward Condition.................... 187 
Forward Destination ................. 187 
Registration Option Parameters 188 
Remove Prefix .......................... 186 
Ring Count................................ 188 

Add/Edit Outbound Phonebook field 

definitions 
E1.............. 220, 221, 222, 223, 224 
T1.............. 177, 178, 179, 180, 181 

Add/Edit Outbound Phonebook fields 

(E1) 
Accept Any Number ................. 220 
Add Prefix................................. 221 
Advanced button....................... 223 
Description................................ 221 
destination pattern..................... 221 
Gateway H.323 ID .................... 222 
Gateway Prefix ......................... 222 
H.323 Port Number................... 222 
IP Address................................. 221 
Protocol Type............................ 221 
Remote Device is [legacy] 

MultiVOIP ............................ 224 

Remove Prefix .......................... 221 
SIP Port Number....................... 223 
SIP URL ................................... 223 
Total Digits ............................... 221 
Transport Protocol (SIP) ........... 223 
Use Gatekeeper ................. 222, 224 
Use Proxy (SIP) ........................ 223 

Add/Edit Outbound Phonebook fields 

(T1) 
Accept Any Number ................. 177 
Add Prefix................................. 178 
Advanced button....................... 180 
Description................................ 178 
Destination Pattern.................... 178 
Gateway H.323 ID .................... 179 
Gateway Prefix ......................... 179 
IP Address................................. 178 
Protocol Type............................ 178 
Q.931 Port Number................... 179 
Remove Prefix .......................... 178 
SIP Port Number....................... 180 
SIP URL ................................... 180 
Total Digits ............................... 178 
Transport Protocol (SIP) ........... 180 

Use Gatekeeper ................. 179, 181 
Use Proxy (SIP) ........................ 180 

Add/Edit Outbound Phonebook screen 

E1 .............................................. 219 
T1 .............................................. 176 

Add/Edit Outbound Phonebook SPP 

Fields 
E1 .............................................. 224 
T1 .............................................. 181 

add-on module (4-to-8 channel), 

installation................................. 361 

Address (SNMP) field................... 123 
Advanced button, Outbound 

Phonebook 
E1 .............................................. 224 
T1 .............................................. 181 

Advanced Features field group .......

82

 

airflow .............................................

34

 

Alerting Party 

Supplementary Services ... 151, 152, 

153 

Allow Incoming Calls Through 

Gatekeeper Only (H.323 Call 
Signaling) field.......................... 109 

Allow Incoming Calls Through SIP 

Proxy Only (SIP Call Signaling) 
field ........................................... 115 

Allowed Name Type 

Alerting Party............ 151, 152, 153 
Calling Party ............................. 150 

Allowed Name Types, Call Name ID 

Alerting Party............................ 151 
Busy Party................................. 152 
Calling Party ............................. 150 
Connected Party ........................ 153 

allowing pop-ups with Web GUI .... 74 
Alternate GK (Gatekeepers) 1 and 2 

(H.323 Call Signaling) fields .... 110 

Alternate IP Address field 

E1 .............................................. 226 
T1 .............................................. 183 

Alternate IP Routing 

E1 .............................................. 219 
T1 .............................................. 176 

Alternate Phone Number field, SPP 

E1 .............................................. 224 

Alternate Phone Number, SPP 

(Add/Edit Outbound Phonebook) 

Summary of Contents for MULTIVOIP MVP-3010












































































































































































































































































































































































































Reviews:

No comments

Related manuals for MULTIVOIP MVP-3010

EAW MX8000 Technical Specifications preview
MX8000
Brand: EAW Pages: 2
3Com 3CRWB6096 Quick Start Manual preview
3CRWB6096
Brand: 3Com Pages: 8
Datasat AP20 Installation And Operating Manual preview
AP20
Brand: Datasat Pages: 32
National Instruments NI 9203 User Manual And Specifications preview
NI 9203
Brand: National Instruments Pages: 85
National Instruments USB-6501 Quick Start preview
USB-6501
Brand: National Instruments Pages: 5
National Instruments PXIe-8106 User Manual preview
PXIe-8106
Brand: National Instruments Pages: 76
Q-See QC814 Specifications preview
QC814
Brand: Q-See Pages: 2
AlphaShield INTERNET PRIVACY PROTECTION (Spanish) Manual Del Usuario preview
INTERNET PRIVACY PROTECTION
Brand: AlphaShield Pages: 49
LSI MegaRAID SCSI 320-2X Quick Installation Manual preview
MegaRAID SCSI 320-2X
Brand: LSI Pages: 4
Omega Engineering OME-A8111 Hardware Manual preview
OME-A8111
Brand: Omega Engineering Pages: 34
Novus NVIP- NVRA0104/GO User Manual preview
NVIP- NVRA0104/GO
Brand: Novus Pages: 44
Kaptia Klever Getting Started preview
Klever
Brand: Kaptia Pages: 14
Trend Micro IPS Pro-Module-24C-GE-BP-TM Quick Setup Manual preview
IPS Pro-Module-24C-GE-BP-TM
Brand: Trend Micro Pages: 3
Alcatel-Lucent 1353 Brochure preview
1353
Brand: Alcatel-Lucent Pages: 12
AXIOMTEK UST510-52B-FL Series User Manual preview
UST510-52B-FL Series
Brand: AXIOMTEK Pages: 77
ExtraHop EDA 4200 Install preview
EDA 4200
Brand: ExtraHop Pages: 2
VIA Technologies LPC-01 Quick Manual preview
LPC-01
Brand: VIA Technologies Pages: 2
AMD -K6-2/450 - MHz Processor Application Note preview
-K6-2/450 - MHz Processor
Brand: AMD Pages: 98

Brands by name

Popular brands

Load more brands