manualshive.com logo in svg

Multitech MultiFRAD FR220, User Manual, Page: 69 / 103

Share
Download
Multitech MultiFRAD FR220 User Manual Download Page 69

69

Chapter 5 - Remote Configuration and Management

7

After you have changed the configuration of the remote MultiFRAD, click Download Setup to
update the configuration. The remote MultiFRAD will be brought down, the new configuration
written to the unit, and the unit will reboot.

8

Click Exit when the downloading is complete.

9

Double-click the MultiFRAD Configuration icon in the MultiFRAD 200 program group to verify
that the MultiFRAD is running.

Remote Management

This section describes typical client applications that can be used to configure the MultiFRAD
remotely. It is important to note that although any subsequent changes to configuration can be made
using these applications, the initial setup and configuration of the MultiFRAD must be done using a
local PC and the MultiFRAD software provided with your unit.

Although establishing access to the MultiFRAD varies between applications, the configuration
functions mirror those of the MultiFRAD software. For more information on MultiFRAD software, refer
to 

Chapter 4 - MultiFRAD Software

.

Telnet

A typical Telnet client application is described next. The MultiFRAD has a built-in Telnet Server that
enables Telnet client PCs to access and configure the MultiFRAD. In addition, the MultiFRAD can be
remotely accessed and configured from any where on the Internet through its Web interface.

The TCP/IP stack has to be loaded before the Telnet client (a Windows application) will run. Also, the
Telnet Server option has to be enabled on the Others Setup dialog box. Double-click the Telnet
icon (or shortcut) and a blank Telnet screen is displayed. Click Connect | Remote System and the
Connect dialog box is displayed. Select (or enter) a Host Name (the IP address of the MultiFRAD).In
this example, the Host Name is 192.168.2.14.

When you enter a valid Host Name (IP address) and click Connect, you are immediately connected
to the target MultiFRAD and the MultiFRAD Telnet Server screen is displayed.

Summary of Contents for MultiFRAD FR220








































































































Reviews:

No comments