manualshive.com logo in svg

Multitech MultiFRAD FR220, User Manual, Page: 28 / 103

Share
Download
Multitech MultiFRAD FR220 User Manual Download Page 28

28

MultiFRAD User Guide

34 To change the Tone Pairs, click the Regional tab and then click the Country/Region down arrow

and highlight your specific country or region.

The Tone Pairs parameters change per your choice.  Click OK when finished.

35 The Checking MultiFRAD dialog box will appear.

Click OK to continue.

36 The Writing Setup dialog box is displayed as the setup configuration is written to the MultiFRAD.

37 After the setup is written to the MultiFRAD, the unit reboots.

38 Check that the BOOT LED on the MultiFRAD is Off after the download is complete. This may take

several minutes as the MultiFRAD reboots.

39 Win3.1 users

 - you are returned to your Program Manager where the MultiFRAD 200 Program

Group and Program Item (Windows icons) have been created.

Win95/98/NT users - you are returned to your MultiFRAD 200 folder which will be visible on your
desktop.

Summary of Contents for MultiFRAD FR220








































































































Reviews:

No comments