Multitech MultiFRAD FR220, User Manual, Page: 63 / 103

63
Chapter 4 - MultiFRAD Software
Others Setup
Clicking the Others button on the main menu displays the Others Setup dialog box. This dialog box
lets you to enable SNMP Agent (the default is
disabled) and set up all the necessary parameters;
enable or disable various remote configuration methods such as TFTP (Trivial File Transfer Protocol)
Server, Web Server, Dumb Terminal, and Telnet Server; and assign a Password to the MultiFRAD for
Internet security. These applications enable remote viewing and changing of the MultiFRAD
configuration, or updating firmware, from anywhere on the connected internetwork.
Verify that the desired applications are enabled (checked). The default condition is all applications
are checked. To disable a given application, click to uncheck the check box and disable support.
SNMP related operations can be performed only when the SNMP Agent is enabled (checked) on this
dialog box. The IP address of the system (i.e., SNMP Manager) that will receive the Traps from the
Multifrad should be entered in the IP Address field in the Trap Manager group. The Community
Name of the SNMP Manager receiving the Traps can be a maximum of 19 characters and is case
sensitive. The default Port Number of the SNMP Manager receiving the Traps is 162. The MultiFRAD
currently supports a maximum of two community users at a time, and they can be assigned either
Read/Write or Read Only rights.
For more information on using these applications, click the on-line Help button or refer to Chapter 5,
Remote Configuration and Management.
The Print Console that displays when you click the Print Console button presents a more detailed
version of the Events list that appears at the bottom of the main menu.
Enable Logging of Statistics
Clicking the Log Setup button on the Others Setup dialog box displays the Log Statistics dialog
box which lets you Enable/Disable Logging, set the time interval (in minutes) between logging, and
either Log all Statistics or only those statistics that you enable (check) on this dialog box. You can
also select specific port data or DLCI data for logging by clicking the appropriate button(s).