CHAPTER 6 CONFIGURING YOUR DEVICE
3.
In the
IP Address
field, type the IP address of the network.
4.
In the
Subnet Mask
field, type the network mask.
Editing or Deleting an Existing Network
1.
To delete a network, click
Delete
.
2.
At the top of the pane, a message tells you the network is deleted. To un-do the delete, click the
Undo
link found in the message.
3.
To edit a network, click
Edit
. Change the IP address or subnet mask as desired. Click
Finish
.
Note:
You cannot edit the network name and you cannot delete a network if it is used in another configuration.
Setting Up Your Device
The initial setup wizard can help you quickly set up the main features of your rCell. To use the wizard:
1.
From
Administration
, select
Initial Setup
, and follow the on-screen instructions.
Note:
The wizard also launches the first time you log into the device's webpage.
2.
On the first panel, the mode option lets you set up the rCell as a Network Router or a PPP-IP Passthrough
device.
a.
The Network Router mode is the default and establishes the device as a cellular network router.
b.
In the PPP-IP Passthrough mode, the rCell passes the IP address it receives from the cellular provider
during a PPP connection to another device.
Note:
In this mode, the rCell only allows one DHCP lease. Many of the services the rCell provides as a
router are diabled in this mode due to the passing of its WAN IP address to another device.
c.
Click
Next
.
3.
In the Choose Password panel, enter the following:
a.
In the
Current Password
field, type the current password. The default password is
admin
.
b.
In the
New Password
field, type the password you want to use to replace the current one.
c.
To confirm the accuracy of the password, re-type it in the
Confirm Password
field.
d.
Click
Next
. Or if you are done making changes, click
Finish
.
Note:
If you do not want to change your password, click
Skip
.
4.
In the Time Configuration panel, set the date, time and time zone.
a.
In the
Time
field, type the desired time.
b.
In the
Date
field, type the desired date.
c.
From the
Time Zone
drop-down, select the time zone in which the router operates.
d.
Click
Next
. Or if you are done making changes, click
Finish
.
5.
In the IP Setup panel, give the router its address and network information:
a.
In the
IP Address
field, type the router's IP address.
b.
In the
Mask
field, type the mask for the network. The default is 255.255.255.0.
c.
In the
Primary DNS
field, type the address of the primary DNS.
36
MultiConnect
®
rCell 100 MTR-H5 User Guide
