CHAPTER 12 DEVICE ADMINISTRATION
Chapter 12 Device Administration
Resetting the Device
You need:
■
A pin, paperclip, or similar thin object that can fit into the reset hole
The following is the default condition for the RESET button on the Conduit. You can program a change to the
behavior of the button if needed.
To reset the device:
1.
Find the hole in the front panel labeled RESET. The reset button is recessed into the case.
2.
Use the pin to quickly press and release the RESET button.
The device reboots.
Restoring User Defined Settings to the Device
You can restore user defined settings to your device.
You need:
■
A pin, paperclip, or similar thin object that can fit into the reset hole
1.
Locate the hole in the panel labeled RESET. The reset button is recessed into the housing.
2.
Use the pin to press in the button for about 3 seconds and then release the reset button.
a.
If you do not press in the button long enough, the device will reset, but the user defined settings will
not be restored.
b.
If you hold it too long, factory default settings will be restored.
The Conduit mLinux Model is shown. The RESET button is in the same location on both Conduit models.
Configuring Device Access
This section contains configurations that determine how the device can be accessed, as well as, security features
that decrease susceptibility to malicious activity.
Web Server
HTTP Redirect to HTTPS:
The router only allows secure access to its Web UI. This set of configurations provides the optional convenience of
automatically redirecting HTTP requests to the device's secure HTTPS port.
Note:
The router can be configured to allow HTTP access to its RESTFUL JSON API. This is intended to allow
embedded devices that do not have SSL/TLS or HTTPS capabilities to configure, monito, and control the
router. Please see the MTR API Developer Guide for more information.
Field
Description
Enabled
Enables HTTP to HTTPS redirect. This will automatically
redirect users trying to access the device via HTTP to
HTTPS.
MultiConnect
®
rCell 100 MTR-H5 User Guide
53
