background image

 

against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment 
off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

In compliance with the FCC rules, 47 CFR 15.21, the user must be notified that changes or 
modifications to the Field PC that are not expressly approved by the manufacturer could void the 
user’s authority to operate the equipment. 

Only approved accessories may be used with this equipment. In general, all cables must be high 
quality, shielded, correctly terminated, and normally restricted to two meters in length. Wall 
chargers approved for this product employ special provisions to avoid radio interference and 
should not be altered or substituted. 

This device is approved for co-location with the P700 Wi-Fi transceiver and BC04 Bluetooth 
transceiver radios integrated in the main units. This device must not be co-located or operating in 
conjunction with any other antenna or transmitter. 

This device operates in compliance with the FCC radio frequency exposure limits for an 
uncontrolled environment. Users must follow instructions provided in the user documentation to 
satisfy compliance with FCC radio frequency exposure requirements. 

There cannot be any alteration to the authorized antenna system. The antenna shipped with the 
cell modem is the only one authorized for use. An antenna must be used when the pack is on the 
device. Using the wrong antenna or using the pack without an antenna voids the warranty. 

This wireless modem is compliant with FCC regulations when operated within the temperature 
range of -30°C to +50°C. Do not operate the wireless modem outside of this temperature range. 

European Union (CE Marking) 

This product is compliant with Council Directives 73/23/EEC, 89/336/EEC, and 1999/5/EC and 
conformity to the following standards is declared: 

EN60950:2000, EN 301 511 V7.0.1 covered by 3GGP TS 51.010 V5.0.0 

EN 301 489-1 V1.2.1 (2002-08), EN 301 489-7 V1.4.1 (2002-08) 

 

P/N 22492-01 Copyright 09/2009 

Summary of Contents for MTSMC-E









Reviews: