background image

MultiModem Wireless Modem with Ethernet Interface 

Multi-Tech Systems, Inc. Quick Start Guide 

 

3. 

  “WARNING – Explosion Hazard – Substitution of 

Components may Impair Suitability for Class I, Division 2”. 

4. 

   “WARNING – Explosion Hazard – Do not Disconnect 

Equipment Unless Power has been switched off or the 
area is known to be Non-hazardous”. 

5.

    “WARNING – Explosion Hazard – Do not replace fuse 

unless power has been switched off or the area is known 
to be non-hazardous” 

6. 

   “WARNING – Do not install or remove SIM card unless 

power has been switched off or the area is known to be 
non-hazardous”. 

Vehicle Safety 

 

Do not use your Wireless MultiModem while driving, unless 

equipped with a correctly installed vehicle kit allowing ‘Hands-
Free’ Operation. 

 

Respect national regulations on the use of cellular telephones 

in vehicles. Road safety always comes first. 

 

If incorrectly installed in a vehicle, the operation of Wireless 

MultiModem telephone could interfere with the correct 
functioning of vehicle electronics. To avoid such problems, be 
sure that qualified personnel have performed the installation. 
Verification of the protection of vehicle electronics should be 
part of the installation. 

 

The use of an alert device to operate a vehicle’s lights or horn 

on public roads is not permitted. 

Summary of Contents for MTCBA-C-EN-N12

















Reviews: