Multitech MTCBA-C-EN-N12, Quick Start Manual

Page: 13 / 16

MultiModem Wireless Modem with Ethernet Interface
Multi-Tech Systems, Inc. Quick Start Guide 13
Idle Time Out – Sets the amount of time the PPP link stays
active before disconnecting. Setting the value to zero causes
the link to stay active continuously.
Dial Number – Enter the dial number. This number connects
you to the Internet.
For GPRS and EDGE , the number is *99***1# .
For CDMA , the number is #777
APN – The APN (Access Point Name) is assigned by your
wireless service provider.
Init String – 5 modem initialization strings are allowed.
For GPRS & EDGE: Include the Access Point Name:
AT+CGDCONT=1,"IP","<APN>"
PPP Authentication
Authentication Type – Click the button corresponding to the
authentication protocol you want to use to negotiate with the
remote peer. PAP, CHAP, or PAP-CHAP.
Default = PAP-CHAP
User Name – Enter the PPP User Name (it authenticates the
remote peer).
Password – Enter the PPP Password (it authenticates the
remote peer).
Important Note About Submit and Save & Restart
Click the Submit button located at the bottom of most screens to
save any changes you make. Then you must click the Save &
Restart button in order for your settings to take effect. Save &
Restart does not have to be executed after each screen; you can
change and Submit several screens, and then click Save &
Restart . The Save & Restart button is located on the Menu bar.