MultiModem Wireless Modem with Ethernet Interface
Multi-Tech Systems, Inc. Quick Start Guide
11
Configure the Ethernet Interface
Using the Web Management Software
You are now ready to configure the Ethernet interface. This is
accomplished by using the modem's factory-installed Web
Management software. The software is accessed through a Web
Browser.
1.
From the workstation, open a Web Browser.
Type the default Gateway Address: http://192.168.2.1
2. Login
After entering the Address, the
Login
screen displays.
•
Type the default User name:
admin
(all lower-case).
•
Type the default password:
admin
(all lower-case).
User Name and Password Note:
The
User name
and
Password
are case-sensitive (both must be typed in
lower-case). A password can be up to 12 characters. If
Windows displays the
AutoComplete
screen, you may
want to click
No
to tell the Windows OS not to
remember the password; this helps maintain PC
security.
Password
Caution:
It is recommended that you
change the default password to better protect the
security of your modem. Use a safe password! Your
first name spelled backwards is not a sufficiently safe
password; a password such as xfT35$4 is better.
•
Click the
Login
button. The Web Management Home
screen displays.
4.
Use the Setup Wizard for Quick Configuration
A quick way to configure the modem is to use the Wizard
Setup in the Web Management software.
•
To begin configuration, click the
Wizard Setup
button
located under the menu bar.
•
After clicking the
Wizard Setup
button, the
Wizard
Setup
screen displays.
Summary of Contents for MTCBA-C-EN-N12
Page 1: ...MultiModem Wireless EDGE GPRS CDMA Modems with Ethernet Interface Quick Start Guide...
Page 15: ......
Page 16: ...82010074L...
