Multitech ISI4608, User Manual

Page: 64 / 77

64
ISI4608 Owner's Manual
Appendix B - ISI4608 Testing Utilities
This disk contains two files that are to be used in conjunction with
ISI4608 boards. These files are described in two sections: 1)
Operation with factory default settings, and 2) Operation with other
than the factory default settings. These files are:
ISI4608.BIN
4608TERM.EXE
Note: This program is a DOS utility.
1. OPERATION WITH FACTORY DEFAULT SETTINGS
The 4608TERM.EXE program is a utility program that emulates a
terminal to test the connection from PC keyboard to ISI board to
Modem to ISI board to PC display. Prior to executing 4608TERM the
program must be executed to initialize the ISI board (when the ISI
board’s factory settings are unchanged).
The following screen is displayed:
ISI4608 Terminal Utility Version 1.00
Copyright (C), 1990-94 Multi-Tech
Systems, Inc
Loading Firmware to ISI4608 located at
address 200h Loading default file:
I S I 4 6 0 8 . B I N
ISI4608 loading firmware.....
ISI4608 verifying firmware.....Verify
O K . ISI4608 firmware loaded
s u c c e s s f u l l y .
ISI firmware loaded successfully...
Enter 1 to 8 for eight ports ISI.
Enter port number ?
Note: This program must be run anytime the PC is powered down or
rebooted.
The first step in this utility is to identify the port to be tested. In order
for the test to function, the selected port must be connected to an
activated modem. The valid entries for the ISI4608 are 1 through 8.
Once a port is selected, the following is displayed:
8-Position DIP switch
set at I/O = 210