64
CommPlete Series 4000 Server SBC, Model IPC-623C
Award BIOS Setup
5-6 Power Management Setup
Choose “POWER MANAGEMENT SETUP” option on the main
menu, the following screen is displayed.
Esc: Quit
F1: Help
F5: Old Values
F6: Load BIOS Defaults
F7: Load Setup Defaults
Pu/Pd/+/-: Modify
(Shift) F2: Color
:Select Item
ROM / PCI / ISA BIOS (2A69KP6C)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
ACPI function
:Disabled
Power Management
:User Define
PM Control by APM
:Yes
Video Off Method
:DPMS
Video Off After
:Standby
MODEM Use IRQ
:N/A
Doze Mode
:Disable
Standby Mode
:Disable
Suspend Mode
:Disable
HDD Power-Down
:Disable
Throttle Duty Cycle
:62.5%
PCI/VGA Act-Monitor
:Disabled
Soft-Off by PWR-BTTN
:Disabled
Wake Up On LAN
:Enabled
IRQ 8 Break Suspend
:Disabled
** Reload Global Timer Events **
IRQ (3-7, 9-15), NMI
:Disabled
Primary IDE 0
:Disabled
Primary IDE 1
:Disabled
Secondary IDE 0
:Disabled
Secondary IDE 1
:Disabled
Floppy Disk
:Disabled
Serial Port
:Disabled
Parallel Port
:Enabled
Figure 5-7: Power Management Setup
This category allows you to configure your system to the most
effective save energy while operating in a manner consistent
with your own style of computer use. Having made all the
settings above, press <ESC> to return to the main menu.
ACPI Function
This item allows you to enable/disable the Advanced
Configuration and Power Management (ACPI).
Power Management
This item allows you to select the type (or degree) of power
saving and is directly related to HDD power down, Doze Mode,
Standby Mode, and Suspend Mode.
PM Control APM
When this item is set to YES, the system BIOS will wait for
APM’s prompt before it enter any PM mode, e.g., Doze,
Standby, or Suspend. If AMP is installed and if there is a task
running, even if the timer has timed out, the AMP will not prompt
the BIOS to put the system into any power saving mode.
