16
CommPlete 4000 Server SBC, Model IPC-623C
Hardware Configuration
2-5 RS232/422/485 (COM2) Selection
JP6 : RS-232/422/485 selection
COM1 supports RS-232 functionality only. (The COM1 port has
a receptacle at the edge of the IPC-623C board.)
COM2 is selectable for RS-232, RS-422, or RS- 485
functionality. (A COM2 connector is available on the IPC-623C
board. To use COM2, you must attach a cable to this
connector. This attached cable must terminate to a receptacle
that can be mounted on the backplane of the CommPlete 4000
chassis.)
The jumper settings are as follows:
1 2
19
JP6
20
Figure 2-4: RS-232 at COM2
