ADVANCED CONFIGURATION
Configuring SNMP Version 1 and 2C
To configure for SNMP Version 1 and 2C:
1.
Go to
System Configuration > SNMP
.
2.
Check
Enable SNMP V1/V2C
.
3.
Enter
Community Name
. The default value is public.
4.
Click
Save
.
Configuring SNMP Version 3
To configure for SNMP Version 3:
1.
Go to
System Configuration > SNMP
.
2.
Check
Enable SNMP 3
.
3.
Enter
Username
,
Password
, and
Confirm Password
.
4.
Click
Save
.
Note:
For SNMP Version 3, the security level is
Authentication - No Privacy
and the Authentication Protocol is
MD5
. These settings are not configurable.
SNMP Settings
Field
Description
Community Name
Enter read-only community name. May contain a-z, A-Z, 0-9, - and _. Max length is 32
characters. Required for SNMP V1/V2C. Default is public.
Username
Enter the username required for SNMP V3. Must be between 5-32 characters long. <ay
contain a-z, A-Z, 0-9, - and _.
Password
Enter authentication password required for SNMP V3. Must be between 8-32 characters
long.
Confirm Password
Re-enter the authentication password.
Configuring SNMP Allowed Addresses
For SNMP versions 1 and 2C, configure allowed IP addresses to specify which networks are allowed to
communicate with FaxFinder. By default, all IP addresses are allowed. As soon as you add one IP address, access
through SNMP V1/V2C will be limited by the IP address list.
Note:
Does not apply to SNMP version 3
1.
Go to
System Configuration > SNMP
.
2.
Click
to open
Allowed IP Addresses
, then click
Add
.
3.
Enter
Network IP address
and netmask in the format of ###.###.###.#/XX, where the ###.###.###.###
represents the IP address and the XX represents the netmask. For example, 192.168.0.0/16.
4.
Click
Save
.
5.
Repeat Steps 1-3 for each IP address or range you want to add.
Deleting IP Addresses
To delete IP addresses
62
FaxFinder
®
Fax Server FF240-IP Administrator Guide
