Multitech BA-Series, User Manual

Page: 25 / 109

25
Chapter 4 - Command Mode
CONFIGURE DATA &E14 Data Compression Disabled
COMPRESSION &E15 Data Compression Enabled
CONFIGURE SPEED $BA0 Speed Conversion On
CONVERSION $BA1 Speed Conversion Off
$MB Set modem speed (e.g.,$MB14400)
$SB Set serial port speed (e.g.,$SB57600)
EXECUTE $H
Help
IMMEDIATE I
Product Code Inquiry
ACTION I 9
Windows 95 Autodetect Inquiry (2834 Series only)
COMMANDS L5
List Current Operating Parameters
L6
List S-Register Values
L7
List additional Configuration Parameters
L8
List On-Line Diagnostics
H
Off Hook
+++AT<CR>
Escape Sequence: Entering Command Mode while On-Line
%E
Escape Sequence Options...Entering Command Mode while On-Line
A
Force Answer Mode
O
Exit Command Mode/Go Back On-Line
EXECUTE %DF Format Line Probe Display (Graph or Table Format)
LINE %DP Enable/Disable Reading Line Probe From DSP during handshake
PROBE L9 Display of Signal Strength Information
COMMANDS L10 Display Signal to Noise Ratio ( SNR)
(2834 Series only) L11 Display of Noise Information
&RP Initiates Retrain to Read Line Probe Parameters
READ AND Sr? Read Current S-Register Value
ASSIGN Sr= Assign S-Register Value
S-REGISTER
VALUES
REMOTE #CBN Passwords for Callback Phone Numbers
CONFIGURATION #DB Callback Security Enable/Disable
& CALLBACK #I Change LOGIN Password
SECURITY #RCBNxx Erase Password Linked with Memory Location xx
#S Change SETUP Password
TEST MODEM U Self-Test Modem (Chapter 8)
&T Enable/Disable Digital Loopback Signal