MULTISOFT VGR-1000, User Manual, Page: 55 / 69

Video Grabber User Manual - v. 1.19 (FW 1.29)
55
LOSSLESS
OBJECTNUMBER Name Access Type Description
4 codec
IFramePeriod read-
write Integer I-Frame period for H264 and
Lossless encoders – setting it to 50
makes every 50
th
frame an I-
Frame.
5 codec
PixelTolerance read-
write Integer Used for analog signal filtering. If
two consecutive frames are
compared and the difference
between Red, Green and Blue
components of the pixel do not
exceed this value then such pixels
are considered identical.
Min: 0
Max: 31
6 codecLlBwLimit
Enable read-
write Enum Bandwidth limiter:
0 – disabled
1 – enabled
7 codecLlBwLimit
WarnLevel read-
write Integer Bandwidth limit warning level in
kilobits per second
8 codecLlBwLimit
WarnTimeToDrop read-
write Integer If codecLIBwLimitWarnLevel is
exceeded more than amount of
seconds set here then frames will
be dropped to keep bandwidth
below the limit
9 codecLlBwLimit
CriticalLevel read-
write Integer Bandwidth limit critical level in
kilobits per second. If exceeded
then FPS is lowered.
10 Codec
LIBistreamCompat read-
write Enum Bitstream compatibility mode:
0 – specification 2.0
1 – specification 2.1