![background image](http://html1.mh-extra.com/html/multiquip/wsc55/wsc55_operation-and-parts-manual_1855132025.webp)
WSC55 SERIES CHEMICAL SPRAY CART • OPERATION AND PARTS MANUAL — REV. #1 (08/30/19) — PAGE 25
SET-UP
4. Locate the bung holes on top of the supply container(s).
Break the bung hole cap seals (if necessary) and
unscrew the bungs (plugs) to remove. See Figure 14.
Figure 14. Open Supply Container
5. Insert the
suction
tube (the
larger
of the two tubes)
into the top of the supply container(s). If the bung holes
are different sizes, be sure to place the suction tube
into the
larger
hole. See Figure 15.
BUNG
HOLES
BUNGS
(UNSCREW)
DRUM
COVER
Figure 15. Tube Installation
6. Insert the
return
tube (the
smaller
of the two tubes)
into the top of the supply container(s). If the bung holes
are different sizes, be sure to place the return tube into
the
smaller
hole (Figure 15).
SUCTION
TUBE
LARGER
HOLE
RETURN
TUBE
SMALLER
HOLE