V305EH VIBRATORY ROLLER • OPERATION AND PARTS MANUAL — REV. #1 (06/21/16) — PAGE 23
OPERATION
This section is intended to assist the operator with the initial
startup of the unit. It is extremely important that this section be
read carefully before using the roller in the field.
DO NOT
use
your roller until this section is thoroughly understood.
1.
ALWAYS
make sure that the emergency stop button
(Figure 18) is pulled all the way out (disengage).
Figure 18. Emergency Stop Button
2.
Move the fuel lever (Figure 19) to the ON position.
Figure 19. Fuel Lever
WARNING
Failure to understand the operation of the roller could
result in severe damage to the unit or personal injury.
CAUTION
NEVER
operate the roller in a confined
area or enclosed area structure that does
not provide ample free flow of air.
CLOSE
CERRADO
OPEN
ABIERTO
PUSH
RELEASE
EMPUJE
VIBRATION
VIBRACION
FORWARD
AVANCE
REVERSE
N
REVERSA
VIBRATION
STOP
PARO
VIBRACION
804100
LIBERAR
PARA
TO
SPRINKLER
ROCIADOR
MULTIQUIP COMPANY, 18910 WILMINGTON AVENUE
CARSON, CALIFORNIA 90746
310-537-3700, 800/421-1244 NATIONWIDE, FAX: 310-537-3927
EMERGENCY
STOP BUTTON
PULL OUT
TO DISENGAGE
3.
Place the
Engine ON/OFF switch
(Figure 20) in the
"ON" position.
Figure 20. Engine ON/OFF Switch
4. To start a cold engine, move the choke lever (Figure 21)
to the
CLOSED
position.
Figure 21. Choke Lever
NOTICE
The
CLOSED
position of the choke lever enriches the
fuel mixture for starting a
COLD
engine. The
OPEN
position provides the correct fuel mixture for normal
operation after starting, and for restarting a warm
engine.