MULTIQUIP UWKB, Instructions

Page: 1 / 4

UWKB — Wheel Kit instrUctions p/n UWKB01 — rev. #0 (02/03/12) — page 1
UWKBWheelKit
For Use on Portable Generators, Pumps, and Welders
The following instructions are intended to assist the user in the assembly of the UWKB Wheel Kit for use on Multiquip
portable generators, pumps, and welders. Please read the entire instructions before assembling the wheel kit.
reqUired tools
„ „ Ratchet„Set„with„10„mm„socket
„ „ Adjustable„Wrench„or„10„mm„open-end„wrench
„ „ Pliers
parts
Verify„that„all„parts„are„accounted„for.„See„Table„1.
WorK safely!
Only„a„
qualified service technician
„with„proper„training„
should„perform„this„installation.„Follow„all„shop„safety„rules„
when„performing„this„installation.
table 1. UWKB Wheel Kit parts
item
no.
part no. description qty. remarks
1 WK1312 Wheel/Tire,„Solid 2
2 8158 Pin,„Cotter„3/16D„x„1-1/2 2
3 29748 Axle„Mount„W/A,„Left„(3„5/8") 1
4 29749 Axle„Mount„W/A,„Right„(3„5/8") 1
5 WK34715 Screw,„M6„x„45 4
6 0948 Washer,„Flat„SAE1/4 24
7 WK34717 Nut,„Nyloc„M6 12
8 WK2250 Clamp,„Small 4
9 WK2300 Clamp,„Large 4
10 29787 Pin,„Clevis„5/16„x„1-1/2 2
11 0300„B Washer,„Flat„SAE„5/16 4
12 0683 Pin,„Cotter„3/32D„x„3/4 2
13 29739 Tube,„Handle 2
14 19717 Grip,„Hand 2
15 29746 Handle„Mount„W/A 2
16 4001 Washer,„Flat„USS„3/8„PLD 2
17 19716 Crutch„Tip 2
18 WK34716 Screw,„HHC„M6„x„90 8
procedUre
1.„ Assemble„the„axle„mounts„(See„Figure„1).„Push„the„
wheel„(item„1)„on„the„axle„mount„(item„3)„and„then„
insert„the„cotter„pin„(item„2)„through„the„outer„axle„
hole.„Bend„the„cotter„pin„to„secure„the„wheel„in„place.„
Repeat„this„step„for„the„other„axle„mount„(item„4).
Figure 1. Axle Mount Assembly
2.„ Turning„your„unit„on„its„side,„or„while„having„a„second„
person„lifting„the„side„in„the„air,„place„the„axle„mount„
under„the„frame„tubing„on„the„side„of„the„unit„as„shown„
in„Figure„2.
Figure 2. Securing Axle Mount to the Frame
NOTICE
Axle„Mount„Length„is„3„5/8„inches.
5
6
7
9
3
7
6
8
18