RX 1510-C/-I/-CI
– 72 –
F I 4 I00
F I 4200
5.4.3
Switching the machine off with the infrared control device
► Move the toggle switch "Start-Stop" on the infrared control from the switch
position "Neutral" to the right to switch position "Stop".
► The following code is displayed: „F I 4100”. The LEDS for generator and oil
pressure drop are active. The stop procedure is initiated.
► Code „F I 4200” is displayed, if no further signal is received from the generator
and from the oil pressure sensor.
Stop procedure
CAUTION
The transmitter is ready for use as long as the toggle switch "Start-Stop" is in the
switch position "Neutral".
► Always turn the transmitter off by switching the toggle switch to "Stop" during
breaks and after finishing work.
Start-up
Summary of Contents for RX 1510-C
Page 2: ...proposition 65 warning Diesel engine exhaust and some of...
Page 18: ...RX 1510 C I CI 18 4 4 7 m 2 76 m 4 2 5 m 2 98 m 30 85 cm 63 cm 1 2 2 Turn radius Speci cations...
Page 24: ...RX 1510 C I CI 24 2 Safety instructions Safety instructions...
Page 36: ...RX 1510 C I CI 36 Use hearing protection Safety instructions...