![background image](http://html1.mh-extra.com/html/multiquip/mq600td80/mq600td80_operation-and-parts-manual_1855341025.webp)
MQ600TD80 TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 25
Operation
1. The MQ600TD80 trash pump should begin pumping
water within a minute depending on the length of suction
hose and height the pump is above water.
Longer suction hoses will require
more time for the pump to begin
pumping water.
2. If pump does not begin to pump water after a few
minutes, check for loose connections or air leaks in
suction hose. Make sure there is water in the pump end
and strainer is not clogged with debris, reference Table 8
(Pump Troubleshooting).
3. Slow down the engine and allow to cool for at least 2
minutes. Place
speed control lever
in the stop position
and listen for the engine to stop running.
NOTE
MQ600TD80 — INITIAL START-UP (ENGINE)
2. Turn the ignition key to the
0
position and remove the
key from the ignition switch.
NEVER
attempt to stop the engine by moving the
decompression lever. Always use the speed control lever
to stop engine.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
When pump is not in use, keep ignition starting key in a
safe place, out of the reach of unauthorized persons.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
Engine Shut-Down
1. Slow down the engine and allow to cool for at least 2
minutes. Place
speed control lever
in the idle position
and turn the ignition key to the
OFF
position.
Summary of Contents for MQ600TD80
Page 3: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 3 NOTES...
Page 15: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 15 NOTES...
Page 41: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 41 NOTES...
Page 65: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 65 NOTES...