![background image](http://html1.mh-extra.com/html/multiquip/mq600td80/mq600td80_operation-and-parts-manual_1855341024.webp)
PAGE 24 —MQ600TD80 TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09)
MQ600TD80 — INITIAL START-UP (ENGINE)
Control Box (F4L913 Old Style)
1. Insert ignition key into the ignition switch located on
the control box (Figure 8)
1. Set the
Speed Control Lever
(Figure 7) to a position
half way between start and stop.
Speed Control Lever
Figure 7. Speed Control Lever
9. If the charge light remains on while the engine is running,
refer to Table 9 (Engine Troubleshooting) or the Deutz
Engine Repair Manual.
10. Move
speed control lever
to full speed position for
maximum engine speed. (See Fig. 7)
Figure 8. Control Box (Old Style)
2. Turn ignition key to position I, and verify that charge
indicator light comes
ON
.
3. Press and hold the "oil pressure bypass switch".
4. Continue turning the ignition key through positions II
and III.
5. Release ignition key as soon as engine starts, and
verify that ignition key automatically returns back to
position I.
6. Release the "oil pressure bypass switch".
7. Verify charge indicator light goes
OFF
immediately when
engine is started.
8. If charge indicator remains lit, increase engine speed
until light goes off. When the charge indicator light goes
off, it can then be assumed that the charging system is
working correctly.
NOTE:
This version engine
does not use the glow
plug indicator lite.
Control Box (F4L914 New Style)
1. Insert ignition key into the ignition switch located on
the control box (Figure 9)
2. Turn ignition key to the
RUN
position, and verify that
voltmeter gauge indicates 12 VDC.
3. Verify that the
battery
and
glow plug
status LED
indicator lamps are
ON
.
4. Continue turning the ignition key from the
RUN
position
to the
START
position.
5. Release ignition key as soon as engine starts, and
verify that ignition key automatically returns back to
the
RUN
position.
6. Verify that the
battery charge
and
glow plug
status
LED indicator lamps are
OFF
.
7. If battery charge indicator lamp remains lit, increase
engine speed until light goes off. When the charge
indicator light goes off, it can then be assumed that the
charging system is working correctly.
8. If the charge light remains on while the engine is running,
refer to Table 9 (Engine Troubleshooting) or the Deutz
Engine Repair Manual.
9. If the
AUX 1
status LED lamp is
ON
, stop engine and
check for broken or defective V-belt.
10. Move
speed control lever
to full speed position for
maximum engine speed. (See Fig. 7)
Figure 9. Control Box (New Style)
Summary of Contents for MQ600TD80
Page 3: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 3 NOTES...
Page 15: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 15 NOTES...
Page 41: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 41 NOTES...
Page 65: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 65 NOTES...