![background image](http://html1.mh-extra.com/html/multiquip/mq600td80/mq600td80_operation-and-parts-manual_1855341021.webp)
MQ600TD80 TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #8 (11/13/09) — PAGE 21
MQ600TD80 — APPLICATION
Figure 4 below shows a typical application using the MQ600TD80 diesel powered trash pump. Please note that this pump
is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not
exceed 3 inches (76 mm) in diameter.
DO NOT
set strainer on bottom of water bed. Placing the strainer above the water bed
will prevent the pump from drawing in excessive amounts of sand and foreign debris.
Figure 4. Pump Application
5.
Total Dynamic Head –
The Dynamic Head
Suction Head plus the Dynamic Discharge
Head. Also referred to as
total head
.
The following terms are usually used when referring to
lift
or
head
:
1.
Static Suction Lift –
The vertical distance from the water
line to the center of the impeller.
2.
Static Discharge Head –
The vertical distance from
the discharge outlet to the point of discharge or liquid
level when discharging into the bottom of a water tank.
3.
Dynamic Suction Head –
The static suction lift plus
the friction in the suction line. Also referred to as
total
suction head
.
4.
Dynamic Discharge Head –
The static
discharge head plus the friction in the
discharge line. Also referred to as
total
discharge head
.
Summary of Contents for MQ600TD80
Page 3: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 3 NOTES...
Page 15: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 15 NOTES...
Page 41: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 41 NOTES...
Page 65: ...MQ600TD80 TRASH PUMP OPERATION AND PARTS MANUAL REV 8 11 13 09 PAGE 65 NOTES...