![background image](http://html1.mh-extra.com/html/multiquip/globug-gb2000/globug-gb2000_operation-and-parts-manual_1855423019.webp)
gb2000 balloon lighT• operaTion and parTs manual — rev. #3 (08/30/12)— page 19
type 2 COMpOnents (s/n G1900119 and abOve)
Figure 4. GB2000 Components
(Type 2 S/N G190019 And Above)
5
3
2
1
4
6
7
8
1.
lamp Fixture
— Made of heat resistant polyester
balloon, with a diameter of 35.5 inches (902 mm) and
two 1000 watt metal halide lamps.
2.
locking pin
— Locks the lamp fixture in place when
attached to the pole on the bracket.
3.
balloon power Cable
— Provides AC power to the
lamps, fan and baloon inflation circuit.
4.
adapter plate
— Attaches to the T-Bar and mast
interface of the light tower to allow the GB2000 to be
installed.
5.
Junction box
— Holds the electrical connection and
cables to connect the lamp fixture to the T-Bar and to
the power cable.
6.
support bracket
— Attaches to T-Bar to support
adapter plate (hardware not shown).
7.
Connector Caps
— Provides protection to the
receptacles on the junction box when not in use.
8.
Fan power Cable
— 38 ft. (11.5 meters) cable that
provides 120 VAC from a GFCI receptacle (generator)
to the T-Bar mounted junction box to run the balloon
fan and inflate the balloon.
NOTICE
Type 2 adapter plate fits most conventional light tower
masts.