![background image](http://html1.mh-extra.com/html/multiquip/g55h/g55h_operation-manual_1855077015.webp)
PAGE 14 — G-55H GASOLINE VIBRATOR — OPERATION MANUAL — REV. #1 (07/08/21)
1. Remove the gasoline cap located on top of fuel tank.
2. Visually inspect to see if fuel level is low. If fuel is low,
replenish with unleaded fuel.
3. When refueling, be sure to use a strainer for filtration.
DO
NOT
top-off fuel. Wipe up any spilled fuel.
Gasoline
is extremely flammable, and
its vapors can cause an explosion if
ignited.
DO
NOT
start the engine near
spilled fuel or combustible fluids.
DO NOT
fill the fuel tank while the engine is running or
hot.
DO NOT
overfill tank, since spilled fuel could ignite if
it comes into contact with hot engine parts or sparks from
the ignition system. Store fuel in approved containers, in
well-ventilated areas and away from sparks and flames.
Explosive Fuel Hazards
WARNING
WARNING
WARNING
WARNING
WARNING
INSPECTION
V-Belt Check
A worn or damaged V-belt can adversely affect the
performance of the vibrator.
1. Unscrew the bolts securing the front belt guard to the
belt housing
2. Inspect the belts for defects or wear.
3. If a V-belt is defective or worn, replace the V-belt as
outlined in the maintenance section of this manual.
Moving the Vibrator
Even though the vibrator is lightweight, always use two
people when lifting the vibrator or moving the unit around the
jobsite.
To
order
go
to
Discount-Equipment.com