![background image](http://html1.mh-extra.com/html/multiquip/g55h/g55h_operation-manual_1855077016.webp)
G-55H GASOLINE VIBRATOR — OPERATION MANUAL — REV. #1 (07/08/21) — PAGE 15
6. Grasp the
recoil starter grip
(Figure 10) and slowly pull
it out. The resistance becomes the hardest at a certain
position, corresponding to the compression point. Pull
the starter grip briskly and smoothly for starting.
Figure 10. Starter Grip
3. Place the engine
choke lever
(Figure 8) in the
CLOSED
position if starting a
cold
engine. Place the
choke lever
in the
OPEN
position if starting a
warm engine
or the
temperature is warm.
START-UP PROCEDURES
Starting the Engine
1. Place the engine
fuel valve lever
(Figure 6) to the
ON
position.
2. Place the engine
throttle lever
(Figure 7) to the
IDLE
or
SLOW
position.
Figure 6. Engine Fuel Valve Lever
Figure 7. Throttle Lever
Figure 8. Engine Choke Lever
5. Place the engine
ON/OFF switch
(Figure 9) in the
ON
position.
Figure 9. Engine ON/OFF Switch
This section is intended to assist the operator
with initial start-up. It is extremely important
that this section be read carefully before
attempting to use the vibrator in the field.
DO NOT
use your vibrator until this section is thoroughly
understood.
Failure to understand the operation of this vibrator could
result in
severe damage
to the vibrator or
personal injury
.
See Figures 2 and 3 for the location of any control
referenced in this manual.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
NEVER
operate the vibrator in a
confined area or enclosed area structure
that does not provide ample
free flow
of air
.
General Safety
Respiratory Hazard
To
order
go
to
Discount-Equipment.com