background image

G-55H GASOLINE VIBRATOR — OPERATION MANUAL — REV. #1 (07/08/21) — PAGE 5

SAFETY MESSAGE ALERT SYMBOLS

Lethal Exhaust Gases

HAZARD SYMBOLS

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others.  The
Safety Messages specifically address the level of exposure
to the operator, and are preceded by one of three words:

DANGER

WARNING

, or 

CAUTION

.

You 

WILL

 be 

KILLED 

or 

SERIOUSLY

 injured if you 

DO

NOT

 follow directions.

You 

CAN

 be 

KILLED

 or 

SERIOUSLY

 injured if you 

DO

NOT

 follow directions.

You 

CAN

 be 

INJURED

 if you 

DO NOT

 follow directions.

CAUTION

Potential hazards associated with  the operation of an 

STOW

G55H Gasoline Vibrator

 will be referenced with Hazard

Symbols which appear throughout this manual, and will be
referenced in conjunction with Safety Message Alert
Symbols.

Engine exhaust gases contain
poisonous carbon monoxide. This gas
is colorless and odorless, and can
cause death if inhaled. 

NEVER

 operate

this equipment in a confined area or
enclosed structure that does not provide ample free flow
air.

Gasoline 

is extremely flammable, and

its vapors can cause an explosion if
ignited.  

DO

 

NOT

 start the engine near

spilled fuel or combustible fluids.

DO NOT

 fill the fuel tank while the engine is running or

hot.  

DO NOT

 overfill tank, since spilled fuel could ignite if

it comes into contact with hot engine parts or sparks from
the ignition system. Store fuel in approved containers, in
well-ventilated areas and away from sparks and flames.

Engine components can generate extreme
heat. To prevent burns, 

DO NOT

 touch

these areas while the engine is running or
immediately after operations. Never
operate the engine with heat shields or heat
guards removed.

ALWAYS

 wear approved 

respiratory

protection when required.

Safety precautions should be followed
at all times when operating this
equipment. Failure to read and
understand the Safety Messages and
Operating Instructions could result in
injury to yourself and others.

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!

DANGER

DANGER

DANGER

DANGER

DANGER

WARNING

WARNING

WARNING

WARNING

WARNING

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

Lethan Exhaust Gas Hazards

WARNING

WARNING

WARNING

WARNING

WARNING

Explosive Fuel Hazards

WARNING

WARNING

WARNING

WARNING

WARNING

Burn Hazards

WARNING

WARNING

WARNING

WARNING

WARNING

Respiratory Hazards

WARNING

WARNING

WARNING

WARNING

WARNING

This Owner's Manual has been developed to provide
complete instructions for the safe and efficient operation
of the

 G-55H Gasoline Vibrator

. Refer to the engine

manufacturers instructions for data relative to its safe
operation.

Before using this vibrator, ensure that the operating
individual has read and understands all instructions
in this manual.

   NOTICE

To 

order 

go 

to 

Discount-Equipment.com

Summary of Contents for G55H

























Reviews: