background image

PRO12 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #3 (09/25/14) — PAGE 7

SAFETY INFORMATION

GENERAL SAFETY

  CAUTION

 

NEVER

 operate this equipment without proper protective 

clothing, shatterproof glasses, respiratory protection, 

hearing protection, steel-toed boots and other protective 

devices required by the job or city and state regulations.

 

Avoid wearing jewelry or loose fi tting clothes that may 

snag on the controls or moving parts as this can cause 

serious injury.

 

NEVER

 operate this equipment when not 

feeling well due to fatigue, illness or when 

under medication.

 

NEVER

 operate this equipment under the 

infl uence of drugs or alcohol. 

 

ALWAYS

 clear the work area of any debris, tools, etc. 

that would constitute a hazard while the equipment is 

in operation.

 

ALWAYS

 check the equipment for loosened threads or 

bolts before starting.

 

DO NOT

 use the equipment for any purpose other than 

its intended purposes or applications.

  NOTICE

 

This equipment should only be operated by trained and 

qualifi ed personnel 18 years of age and older.

 

Whenever necessary, replace nameplate, operation and 

safety decals when they become diffi cult read.

 

Manufacturer does not assume responsibility for any 

accident due to equipment modifi cations. Unauthorized 

equipment modifi cation will void all warranties.

 

NEVER

 use accessories or attachments that are not 

recommended by Multiquip for this equipment. Damage 

to the equipment and/or injury to user may result.

 

ALWAYS

 know the location of the nearest 

fi re extinguisher.

 

ALWAYS 

know the location of the nearest 

fi rst aid kit.

 

ALWAYS

 know the location of the nearest phone or 

keep 

a phone on the job site.

 Also, know the phone numbers 

of the nearest 

ambulance, doctor 

and 

fi re department. 

This information will be invaluable in the case of an 

emergency.

Go to Discount-Equipment.com 

to order your parts

Summary of Contents for Essick PRO12E51





























































Reviews: