MULTIQUIP Essick PRO12E51, Operation And Parts Manual

Page: 9 / 60

PRO12 HYDRAULIC MIXER • OPERATION AND PARTS MANUAL — REV. #3 (09/25/14) — PAGE 9
SAFETY INFORMATION
FUEL SAFETY (GASOLINE MODELS ONLY)
DANGER

DO NOT add fuel to equipment if it is placed inside truck
bed with plastic liner. Possibility exists of explosion or
fi re due to static electricity.

DO NOT
start the engine near spilled fuel or combustible
fl uids. Fuel is extremely fl ammable and its vapors can
cause an explosion if ignited.

ALWAYS refuel in a well-ventilated area, away from
sparks and open fl ames.

ALWAYS
use extreme caution when working with
fl ammable
liquids.

DO NOT fi ll the fuel tank while the engine is running
or hot.

DO NOT overfi ll tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from
the ignition system.

Store fuel in appropriate containers, in well-ventilated
areas and away from sparks and fl ames.

NEVER use fuel as a cleaning agent.

DO NOT smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine.
FUEL
FUEL
GENERATOR SAFETY
If using a generator to power mixer, refer
to applicable generator manual safety
information section.
ELECTRIC MOTOR SAFETY (ELECTRIC MODELS
ONLY)
NOTICE

Operate electric motor only at the specifi ed voltage
indicated on the nameplate.

DO NOT spray water onto electric motor.

ALWAYS disconnect AC power plug from power source
before moving mixer.

ALWAYS
make sure the ON/OFF switch
on the electric motor is in the OFF position
when not in use and before inserting the
mixer’s power plug into an AC receptacle.
Power Cord/Cable Safety
DANGER

NEVER
let power cords or cables
lay in water.

NEVER
use
damaged
or
worn
cables or cords when
connecting equipment to generator. Inspect for cuts in
the insulation.

NEVER grab or touch a live power
cord or cable with wet hands. The
possibility exists of
electrical shock,
electrocution or death.

Make sure power cables are securely connected.
Incorrect connections may cause electrical shock and
damage to the mixer.
CAUTION
 Ensure that cables and cords will not be tripped over or
trapped underneath the mixer.
NOTICE

ALWAYS
make certain that proper power or extension
cord has been selected for the job.
Go to Discount-Equipment.com
to order your parts