![background image](http://html1.mh-extra.com/html/multiquip/b46h11/b46h11_operation-manual_1854957023.webp)
J36/B46-M30 SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #1 (11/17/17) — PAGE 23
Centrifugal Safety Stop Switch Connection
Connect the black tail wire from the engine to the black
safety stop wire from the centrifugal stop switch as shown
in Figure 10.
Figure 10. Centrifugal Safety Stop Switch
Connection
Blade Pitch Cable Installation
1. For trowels equipped with a
standard
handle (SXHC),
turn the star wheel
counterclockwise to release
tension on the blade pitch cable. See Figure 11.
Figure 11. Blade Pitch Cable Adjustment
(Standard Handle)
2. For trowels equipped with a
Quick Pitch™ handle
(QXHC), squeeze the trigger lock and push the
T-handle towards the engine to release tension on the
blade pitch cable. See Figure 12.
SAFETY STOP WIRE
CONNECTION POINT
INCREASE
BLADE PITCH
(CW)
DECREASE
BLADE PITCH
(CCW)
Figure 12. Blade Pitch Cable Adjustment
(Quick Pitch™ Handle)
3. Remove brass set nut #1 from the end of the blade
pitch cable (Figure 13).
Figure 13. Blade Pitch Cable
4. Thread brass set nut #2 as far as possible towards the
blade pitch cable (Figure 13).
T-HANDLE
TRIGGER
LOCK
NO
PITCH
FULL
PITCH
WARNING
The Quick Pitch™ T-handle is under spring tension and
can snap in the direction of force (toward the user) if not
firmly grasped, which may cause bodily injury.
BLADE
PITCH
CABLE
BRASS SET
NUT #1
BRASS SET
NUT #2
SET-UP