PAGE 30 — J36/B46-M30 SERIES WALK-BEHIND TROWELS • OPERATION MANUAL — REV. #1 (11/17/17)
OPERATION
2. Place the engine ON/OFF switch in the
ON position
(Figure 28).
Figure 28. Engine ON/OFF Switch (ON)
3.
Place the throttle lever in the
IDLE position (Figure 29).
Figure 29. Throttle Lever (Idle)
4. If starting a cold engine, place the choke lever in the
CLOSED position (Figure 30).
Figure 30. Choke Lever (Closed)
5. If starting a warm engine, place the choke lever in the
OPEN position (Figure 31).
ON
OFF
ENGINE SWITCH
THROTTLE
LEVER
IDLE
CLOSE
OPEN
HONDA GX
ROBIN-SUBARU EX
CHOKE
LEVER
CLOSED
CHOKE
LEVER
CLOSED
Figure 31. Choke Lever (Open)
6. Slowly pull the starter grip (Figure 32) until resistance
is felt, then pull briskly and smoothly to start the engine.
Gently return the starter grip to its original position.
Figure 32. Starter Grip
7. If the engine has started, slowly return the choke lever
to the
CLOSED position (Figure 30). If the engine has
not started, repeat steps 1 through 6.
8. Before operating the trowel, run the engine for several
minutes and check for fuel leaks and loose components.
CENTRIFUGAL SAFETY STOP SWITCH TEST
1.
Clear the area around the trowel. Make sure it is free of
debris and objects.
CLOSE
OPEN
HONDA GX
ROBIN-SUBARU EX
CHOKE
LEVER
OPEN
CHOKE
LEVER
OPEN
STARTER GRIP